The SMART Induction Warmer uses as little as 100 watts!
Item Number: 1AIW230V
The SMART Induction Warmer is the most economical warmer on the market today. This is the 230 volt model, but it is also available in a 110 volt model (1AIW110V). It requires 69% less energy than our closest competitor. The warmer can be flush mounted into a countertop or it can be attached to a flush mounted chafer. It is also designed for use with our Smart square chafer bases (models 1A11261 & 1A11265). We use a patented magnetic system to hold the chafer in place & attach the warmer to the chafer. The system has a symbiotic relationship between the warmer and our induction chafers. This warmer only requires 200 watts/ 0.87 amps per chafer. This will allow you to run up to 17 chafing dishes on a single 15 amp circuit. Unit is single phase, 50/60 Hz.
When converting from canned fuel to induction the largest expense is rewiring, not purchasing of the heaters. The building has to be rewired to accommodate the power required for most inductions. Our system eliminates the need to rewire 19 out of 20 times. By eliminating the costs associated with canned fuel, it will pay for all the new banquet equipment within 9 months in most cases.
Going green made easy: When our induction warming system is combined with our chafers and urns, you only need 1.82 amps of power per chafer, soup or coffee urn. This makes our system the greenest in the world for heating your buffet, and enables you to run as many as ten induction warmers on a single 20 amp circuit. Having such a low power requirement will allow you to easily set up buffets in meeting rooms, or on the fly without fear of tripping breakers.
Induction for Dummies: Your staff turns it on and walks away.
- Adjustable automatic shut off controller
- Auto temperature control between 145℉ - 165℉
- Auto timer for 1-9 hours (preset at 6 hours)
- No fire hazards
- Consistent temperatures
- Safe and secure
- Heats chafers, not the room
At 200 watts, the induction is most compatible with our chafers. It can be used with models 1A15300, 1A15301, 1A15302, 1A15303, 1A15600, 1A15601, 1A15700, 1A15701, 1A15702, 1A15703, 1A15704, 1A15705, 1A15706 & 1A15707. It is also compatible with most of our competitors chafers, BUT efficiency is greatly reduced. Competitors chafers may require as much as 600 watts/ 2.61 amps.
Induction conversion kits are available for our roll top chafers.
- Carton quantity
- Dimensions (L x W x H)
- 8.75" x 8.75" x 3.125"
- 4 lbs.
- Cost Effective
— Convert from canned fuel to induction. The savings will pay for all your equipment!
— Provides optional usage.
- Easy to use
— Snaps to the bottom of chafer with magnets. No tools required.
— Uses 66.29% less energy than most competitors. Holds temperature at 200 watts with Smart Chafers.
- Electric Heat
— Holds an even, constant heat.
— Brings Smart Chafer to temperature in 10 minutes at 400 watts; 20 minutes at 300 watts.
— Eliminates fuel use, can waste & ozone damage.
- Low Wattage
— 200 Watts, 0.87 Amps = 17 Smart Chafers
- Power Requirements
— Single phase, 230V, 50/60 Hz
— No flames, no fumes, no smell.
- Temperature Controller
— Heats chafing dishes quicker than canned heat.
— Heat continuously for 6 hours non-stop. Most competitors must be reset at 2 hours.
— Minimal requirements for ventilation.